Structured Cabling
Done once, and done properly.
Good cabling disappears into the building and quietly does its job for decades. Bad cabling causes intermittent faults that no amount of new equipment will fix. We only do the first kind.
Every job starts with the routes: where the runs go, how they are supported, and how the comms room is laid out. We prewire new builds at the rough-in stage, before the walls close, and retrofit occupied buildings through ceiling spaces, cavities and risers, cut in cleanly and made good.
Scope of Works
What a cabling package includes.
Four things make up a proper cabling job: the copper, the fibre, the hardware that terminates them, and the paperwork that proves it all works.
Cat6 & Cat6A copper
High-performance copper runs for data points, cameras, access points and phones: Cat6 for gigabit traffic, Cat6A where 10-gigabit speeds, heavier PoE loads or electrically noisy environments demand the extra headroom.
Optical fibre
Fibre backbone links between buildings, floors and comms rooms, terminated and tested for the long-distance, high-bandwidth runs that copper can't reach.
Racks & patch panels
Comms cabinets and floor distributors built properly: dressed looms, ventilated racks, colour-coded patching and cable management that keeps the cabinet tidy for life, not just on handover day.
Certification & labelling
Every outlet tested with cable test equipment, labelled at both ends and recorded in a port map, with handover documentation any IT provider can pick up and use without guesswork.
Testing & Standards
Proven to work before we hand it over.
Every point tested
Not just “it works”. Each outlet is verified with proper test equipment and signed off, so faults are caught before handover, not months later.
Neat, concealed runs
Cables routed through wall cavities, ceilings and risers with proper support and separation. No trays of spaghetti, no sagging bundles.
Capacity for what's next
Runs and spare capacity specified for the cameras, Wi-Fi access points and workstations you'll add later, not just what you need today.
Documentation you can hand over
Port maps, test results and labelling schedules that pass cleanly to any IT provider, with no guesswork about what goes where.
One Cable Plant
Cabling is the foundation.
Cameras, readers, access points and phones are the visible part of the system. The cable plant behind them decides whether they work every day or fail intermittently, which is why we treat cabling as infrastructure, not an afterthought.
- CCTV. Every IP camera is a cable run; power and footage travel on the same cable, so a poor termination shows up as dropouts and lost recordings.
- Access control. A reader that loses its link is a door that stops working; controllers depend on clean, reliable runs back to the panel.
- Wi-Fi. PoE cabling carries both data and power, so access points go where coverage demands, not where the power points happen to be.
- Voice & data. Workstations, phones, printers and POS all terminate on the same patch panel, managed as one plant instead of a tangle of one-off fixes.
Where It's Used
From single fit-outs to entire buildings.
Office fit-outs
Workstation points, meeting rooms, Wi-Fi and the comms room, cabled to the fit-out program and ready for day one. We coordinate with builders and other trades so cabling never holds up handover.
Warehouses & industrial
Long runs, high ceilings and electrically noisy environments. We choose cable grades and routes that suit the conditions and reach cameras, scanners and access points across the whole site.
Multi-tenant buildings
Risers, floor distributors and building-wide backbones cabled floor by floor, with the documentation building managers, body corporates and IT providers expect.
Good to Know
Straight answers on structured cabling.
Cat6 comfortably handles gigabit networking and suits most offices and smaller sites. Cat6A supports 10-gigabit speeds over full-length runs and performs better in electrically noisy environments, which makes it the better choice for new commercial fit-outs, high-density Wi-Fi and anywhere you want maximum headroom. We'll recommend the right grade for each run based on distance, environment and what the cabling needs to carry. Often a mix of both is the most cost-effective answer.
Far less than most people expect. We route cables through ceiling spaces, wall cavities and existing risers wherever possible, cut in outlets cleanly, and leave every room as we found it. In occupied offices we can stage the work around your team or complete it after hours. During the site assessment we'll walk the routes with you and flag anything that needs patching or making good before we start, so there are no surprises.
Yes, every single point. Each outlet is tested with proper cable test equipment to confirm the termination, wiring map and performance of the run, then labelled at both the outlet and the patch panel. You receive the results as part of your handover documentation, so if a device ever misbehaves you can rule out the cabling immediately instead of paying someone to guess.
Absolutely, it's the ideal time to do it. We work in at the rough-in stage alongside your builder and electrician, running cabling for data points, cameras, access points, intercoms and alarms while the frames are open. Prewiring costs a fraction of retrofitting the same points later, and we coordinate directly with the site supervisor so the trades schedule isn't held up.
Related Solutions
What runs over the cable plant.
Business Networks
The switching, routing and Wi-Fi that ride on the cabling, engineered by the same team, as one system.
View serviceCCTV & Video Surveillance
IP camera systems that draw power and carry footage over the same structured cabling.
View serviceIntercom Systems
Video intercoms for entries, gates and lobbies, cabled and commissioned as part of the same job.
View serviceOur cabling usually sits inside a larger scope, behind the cameras, access control and networks we deliver for sites across Sydney.
View our projectsGet the Design Right
Cable it once. Build on it for decades.
Tell us about the building and what it needs to carry. We'll walk the routes, count the points and quote the job properly.